Free Shipping Orders Over $70
Toolcraft Chrome Phosphate BCG Review

Toolcraft Chrome Phosphate BCG Review

Toolcraft Chrome Phosphate BCG

History

The story of the M-16's procurement and the evolution of its components over time is fascinating to a gun-nut like me. The bolt carrier group (BCG) is an important part of that story. 

As Eugene Stoner designed it, the BCG was originally chrome plated inside and out. This was an excellent finish for a component that would see harsh conditions especially considering the dirty nature of the rifle's newly patented "direct impingement" system. 

Over time however, probably driven more by cost than anything else, the chrome finish gave way to a less expensive manganese phosphate finish. Chrome was retained on the interior of the gas key and the carrier where the bolt and gas rings ride. 

Toolcraft Phosphate Carrier Showing Internal Chrome Lining

Chrome lining inside Toolcraft carrier can be seen with light coming in from the cam pin slot

With few exceptions, this is the chrome phosphate BCG that the military uses today and is the subject of this review. 

Proprietary Carrier Steel

82% of the weight of a full-auto bolt carrier group is in the carrier. (9.5 oz. of 11.6 oz. on the one used for this review). If you can improve on the material the carrier is made from then you have made a better BCG. It's just that simple, and that is exactly what Toolcraft has done. 

Most AR-15 BCG carriers are made from "gun quality" 8620 steel which is a very good steel. Toolcraft carriers are not made from this steel.  They're made from something better. Something nobody else has - Toolcraft Proprietary Aircraft Quality 8620 (TPAQ 8620) steel. Toolcraft describes this blend as being the "best Aircraft Quality 8620 steel" available. 

Toolcraft Proprietary 8620 Carrier Steel Comparison

Toolcraft uses an improved grade of 8620 steel

Toolcraft takes this TPAQ 8620 steel, machines it, hardens it and then machines it again to precise final dimensions with very high tolerances. This makes for a metal finish that has a very smooth finish and little or no machining marks. 

Once the carrier is finished in MIL-SPEC manganese phosphate it really is a thing of beauty. It's not a slick finish like nitride but instead has a velvety texture to it that feels good in the hand. 

Toolcraft Phosphate Carrier Smooth Finish

Old school phosphate has a good feel in the hand

Cherished by traditionalists and lauded for it's ability to "hold oil", the phosphate finish will wear smooth on the contact and wear points like the carrier rails. A brand new phosphate BCG can need a little extra oil to run well until all the parts break in and the finish smooths out.  

Mil-Spec Carpenter 158 Bolt

The bolt in this particular bolt carrier group is made from MIL-SPEC Carpenter 158 steel. It just seemed right to pair a MIL-SPEC chrome phosphate carrier with a MIL-SPEC steel bolt. 

Carpenter 158 has proven itself to be a dependable bolt steel in every conflict since the Vietnam War. While other more modern steels have arrived on the scene and are in use in AR15 bolts, Carpenter 158 continues to soldier on reliably and unfailingly.

Toolcraft Phosphate Carpenter 158 Bolt With Markings

Toolcraft bolt marked C158 for the MIL-SPEC Carpenter 158 steel it is made from

Even a great bolt steel like C-158 won't overcome one weakness that the AR-15 has shown over the years as it evolved to shorter barrels and gas systems - weak extraction.  The extractor spring that worked well for the 20" AR-15 has often proven to be too weak to reliably extract cases on shorter barreled AR-15s. Not all the time, but the shorter the barrel and gas system and the harsher the firing schedule, the more pronounced the problem. 

Extractor and Chrome Plated Firing Pin Removed From Toolcraft Phosphate BCG

Addition of Viton O-ring ensures positive case extraction. Shown with chrome plated firing pin.

One early solution, and still a good one, was the use of a Viton O-ring around the extractor spring. This O-ring greatly increases extractor tension and largely overcomes this problem. This chrome phosphate BCG, like all the Toolcraft BCGs we sell, has this Viton O-ring on the extractor for the increased reliability it provides. 

Good to Go

The Toolcraft chrome phosphate BCG is true to the original in form, fit and function. Through a combination of both proprietary improvements (carrier steel) and modern improvements (Viton O-ring), the Toolcraft offering is at least as good if not better than the original. It's a solid choice that won't let you down. All Toolcraft bolt carrier groups are backed by the Toolcraft Lifetime Warranty. 

Shop Toolcraft Chrome Phosphate BCGs Now

Toolcraft Chrome Phosphate BCG Disassembled

Toolcraft Chrome Phosphate BCG disassembled

Toolcraft Chrome Phosphate BCG 556 Specs

Bolt Shot Peened; MPI

Bolt Material Carpenter 158 Steel

Bolt Finish Manganese Phosphate 

Caliber 223 | 5.56 NATO | 300 Blackout

Extractor O-ring Viton; Mil Spec

Carrier Material 8620 Steel, Toolcraft Proprietary

Carrier Finish Manganese Phosphate | Chrome Lined

Carrier Design M16 Full Auto Style

Gas Key Material 4130 Steel

Cam Pin Material 4140 Steel

Cam Pin Finish Manganese Phosphate  

Firing Pin Material 8740 Steel; Hard Chrome Plated

Shop Now: Toolcraft Chrome Phosphate BCG

Compare the top 3 black BCG finishes: The Best Black BCG Finish - Phosphate vs Nitride vs DLC  

See our review of the Toolcraft Black Nitride BCG: Toolcraft BCG - Best Black Rifle Secret Ever?

Shop all Toolcraft BCGs here: Toolcraft

Aug 22, 2019 David Blazek

Recent Posts