Toolcraft 308 AR10 BCG Black Nitride
- Maximum Purchase:
- 3 units
Free Shipping on all Toolcraft Bolt Carrier Groups!
This Toolcraft 308 Bolt Carrier Group is designed for use in DPMS pattern AR10 rifles chambered in the 308 family of calibers. It is a full auto BCG and has forward assist serrations.
This BCG is not for use with DPMS G2 rifles.
For the 6.5 Creedmoor consider a BCG specifically designed for that higher pressure cartridge with a smaller diameter firing pin and double ejectors: 6.5 Creedmoor Double Ejector BCG or 6.5 Creedmoor Nickel Boron Double Ejector BCG.
See views of Toolcraft BCGs here - Toolcraft Gallery
See our 556 Toolcraft BCG review here: Toolcraft BCG Review - Best Black Rifle Secret Ever?
Also available in Nickel Boron: Toolcraft 308 BCG Nickel Boron
|Shot Peened; MPI
|308 Winchester Family
|Viton; Mil Spec
|8620 Steel, Toolcraft Proprietary
|Gas Key Material
|4130 Steel; Grade 8 Gas Key Screws
|Cam Pin Material
|Cam Pin Finish
|Firing Pin Material
|8740 Steel; Hard Chrome Plated
Note: Some dealers are selling Toolcraft BCGs that have been finished after leaving Toolcraft. The finish on those BCGs would not be warrantied by Toolcraft. All Toolcraft bolt carrier groups sold by SpiceTac include the 100% no-questions-asked Toolcraft warranty.
Above: This AR10 pistol was build with a Toolcraft 308 Bolt Carrier Group (BCG), SBA3 pistol brace and a M-LOK free float handguard. The AR10 is not as standardized as the AR15 accross all components. A bit more care is needed in parts selection to ensure compatibility.
A note from Toolcraft
Toolcraft carriers are made from the best materials that can be purchased in the market today. Regardless of the coating you choose, the carrier that it protects is made the right way, with no compromise of standards using materials that are Made in the USA. There is the basic 8620 steel, a better grade of Gun Quality 8620 steel, an even better grade of Aircraft Quality 8620 steel, but then there is the best Aircraft Quality 8620 steel that is proprietary to Toolcraft only and no one else. These high standards of materials set us apart from the rest.
While some manufacturers have compromised the Mil-Spec standards of machining just to add to their profits, Toolcraft has stayed loyal to the Mil-Spec machining standards since the beginning.
All Toolcraft carriers are post-heat treat machined to remove any distortion that has occurred during the heat treat process. We first grind the outside rails that are in contact with the upper after heat treat. Next, we machine the inside bore where the bolt is doing the work. This ensures the gas rings are not damaged and that the weapon cycles and charges smoothly. These standards are not just met, but we exceed them on every operation during the machining processes and this effort gives our carriers a superior finish with no machining lines.
Toolcraft machines each carrier to last for thousands of rounds and that is why we can offer with confidence a Lifetime Warranty on our products. These standards have given each consumer the confidence that when they use a Toolcraft bolt carrier group in their weapon, it will do what it was created to do, round after round for years to come.